The Surfboard Studio - Wetsuit Repair Kit

The Surfboard Studio - Wetsuit Repair Kit

Regular price$29.95
/
Tax included.

The Surfboard Studio's Wetsuit Repair Kit is designed for surfers who need a quick repair to keep their wetsuit watertight. The Wetsuit Repair Glue is designed to cure to a flexible elastic rubber ensuring a solid permanent, waterproof bond for any small splits or tears in your wetsuit. For larger repairs, the included neoprene patch can be used. Designed for use with neoprene and rubber, the glue cures within 24 hours, ensuring your wetsuit remains watertight and extending the life of your wetsuit.  

CONTENTS:


•  Wetsuit Repair Glue (15ml)  
•  1 x Applicator Brush
•  1 x Neoprene Patch (1mm)  
•  2 x Iron-on Neoprene Tape (1mm)   
•  1 x Strip of Heat Shielding Paper (For Ironing On) 
•  1 x Large Eye Sewing Needle plus Nylon Thread

DIRECTIONS:

  • Preparation: rinse damaged section with fresh water and allow suit to fully dry. Lay suit flat and align torn edges so they meet cleanly without overlapping.

 

  • Apply glue: using the included applicator brush, apply a thin, even layer of the Wetsuit Repair Glue to both sides of the tear. Allow glue to become tacky (usually takes only a few minutes), then firmly press edges together to create a strong bond.

 

  • Reinforce: if needed, for larger tears, use the included neoprene patch by placing over the inside of the repair and glue it using the Wetsuit Repair Glue. Alternatively, use the iron-on neoprene tape for added strength (particularly useful for seams) or stitch the area using the included needle and nylon thread before sealing with the Wetsuit Repair Glue.

 

  • Cure & Seal: allow the repair to cure for up to 24 hours in a dry, ventilated area. Once fully cured, the glue forms a flexible, waterproof seal.

 

HAZARD IDENTIFICATION:
Neurotoxic risk – Wetsuit glue can contain high amounts of Toluene which is neurotoxic if inhaled or absorbed through skin.
Flammable – This product is classified as highly flammable.
Irritation – Contact with skin or eyes will cause serious irritation.
Respiratory impact – inhalation will cause respiratory tract irritation, dizziness and possible drowsiness.

SAFE HANDLING:
Always use in a well-ventilated area.
Wear Nitrile gloves and safety goggles to prevent direct contact with skin and eyes
It is recommended that a respirator (rated for organic vapours) is used in cases of prolonged use of/exposure to this product.
Wash hands thoroughly after use. 
Do not consume food or drink while using this product.

EMERGENCIES:
Eye contact – immediately flush with water for 15 minutes; seek medical attention immediately.
Skin contact – wash area thoroughly with soap and warm water.
Inhalation – immediately move to fresh air; if symptoms such as dizziness and drowsiness persist, seek medical attention.
Ingestion – do not induce vomiting. Rinse mouth and seek immediate medical attention.

STORAGE: 
Store in a cool, dry space between 18 and 32 degrees Celsius. 
Always ensure container is tightly sealed. 

DISPOSAL:
Always dispose in accordance with local hazardous waste regulations. 
Do not pour down drains.

Order Price

Freight Price

Less than < $100 $15
More than > $100* FREE*


* Excludes hardboards, consignment goods, second-hand goods, demo stock, and oversized items. A flat rate for shipping applies as follows to bulky items and boards:

East Coast (NSW, QLD, VIC, ACT)


Bulky Items $50
Boards $150


Other (WA/NT/SA/TAS)


Bulky items $80
Boards $250

 

Google Reviews

★★★★★

The Stonker team with Ben leading my recent SUP purchase provided me with terrific advice for my specific needs. Can’t wait to get out there!!!! 🏄‍♂️🏄‍♂️🏄‍♂️

Mike
Stonker Google Review
★★★★★

Ben provided great advice, pricing and free shipping (to Perth). Items shipped next day. Great service, thanks Bob

Bob
Stonker Google Review
★★★★★

The team at Stonker is not only hardworking but also lovely. My experience with Jess and Ben was truly exceptional as they possess extensive knowledge about their products. Despite I was interstate, I communicated with them over the phone and received exemplary assistance. I am extremely satisfied with their services and highly recommend Stonker to others. I will certainly be a returning customer in the future.

Yvette
Stonker Google Review
★★★★★

Talk to the crew at Stonker on Monday, by Friday lunch was out foiling on my new 6.1 Armstrong wing in Adelaide. Out standing!

Allan
Stonker Google Reviews
★★★★★

Great service, advise and support. Thanks Ben for giving the local community an option for growing and supporting foiling. Most appreciated 👍.

Paul
Stonker Google Review